.jpg){kind=logo}
Peningkatan Pengetahuan Pembuatan Rangkaian Elektronika Menggunakan Proteus Di SMKN 3 Kota Tegal
(1) Politeknik Harapan Bersama
(2) Politeknik Harapan Bersama
(3) Politeknik Harapan Bersama
(4) Politeknik Harapan Bersama
(5) Politeknik Harapan Bersama
(*) Corresponding Author
Abstract
This community service activity was initiated in response to the limited ability of students at SMKN 3 Kota Tegal to design and analyze electronic circuits, due to inadequate access to industry-standard simulation software. The purpose of this program was to enhance students’ knowledge and skills through training in electronic circuit development using Proteus software. The implementation method consisted of preparation, training sessions, hands-on practice, and ongoing monitoring and evaluation. Participants included eleventh-grade students from the Electronics Engineering Department and accompanying teachers, who engaged in activities ranging from component introduction, circuit simulation, PCB design, to practical PCB fabrication using CNC machines. Evaluation results indicated a significant improvement in students’ understanding and technical capabilities, evidenced by an increase in average test scores from 75 to 93, and a 133 percent rise in the number of students achieving top score ranges. Furthermore, a shift was observed in teaching methods, from conventional whiteboard instruction to digitally integrated simulations. In conclusion, the Proteus-based training effectively enhanced students’ technical competencies, bridged the gap between theoretical concepts and practical applications, and better prepared vocational graduates to meet the demands of a technology-driven industrial environment..
Keywords
Full Text:
PDFReferences
Achmad, I. Z., Rijanto, T., Zuhrie, M. S., & Kholis, N. (2025). Pengaruh Penggunaan Aplikasi SImulasi Factory I/O Sebagai Media Pembelajaran Terhadap Hasil Belajar Peserta Didik Jurusan Teknik Kelistrikan Kapal Pada Elemen Sistem Kontrol Kelistrikan di SMK NEGERI 3 Buduran. Jurnal Pendidikan Teknik Elektro, 14(03), 175–181.
Alfarisi, S. (2020). Peningkatan Kreativitas Siswa SMA Melalui Model Pembelajaran Project Based Learning(PJBL) Dengan Pendekatan STEM Pada Materi Alat-Alat Optik. http://repository.upi.edu/46642/
Anggriany, M. H., Parsa, I. M., & Tamal, C. P. (2023). Pengaruh Penggunaan Media Pembelajaran Video Tutorial Dan Media Pembelajaran Software Simulasi Proteus Terhadap Hasil Belajar Mata Pelajaran Gambar Teknik Listrik. Jurnal Spektro, 6(1), 1–7.
Anonymous. (2024). Informasi 9 Jurusan di SMKN 3 Kota Tegal – SMKN 3 TEGAL. Https://Smkn3tegal.Sch.Id/. https://smkn3tegal.sch.id/informasi-9-jurusan-di-smkn-3-kota-tegal/
Ariyana, R. Y., Susanti, E., & Nurnawati, E. K. (2023). Pelatihan Komputer Untuk Guru Taman Kanak-Kanak Se-Kota Yogyakarta. Jurnal Altifani Penelitian Dan Pengabdian Kepada Masyarakat, 3(1), 6–12. https://doi.org/10.25008/altifani.v3i1.313
Azizah, N. (2025). Menjelajahi Elektronika Dasar dengan Simulasi Proteus. Selat Media.
Firdaus, H., Nulhakim, L., & Program, P. (2024). The Effectiveness of Electronic Teaching Materials in Vocational High Schools on Students’ Independent Learning Responses. ICoCSE) Proceedings, 1, 111–116.
H, N., Aswan, D., Bena, B. A., & Ramli, A. M. (2023). Pelatiahan Gamifikasi dalam Pembelajaran Sekolah Menegah Atas.
Hasni, W., Aprima, S. G., & Fadriati, F. (2024). Desain Pembelajaran yang Inspiratif dan Pengembangan Kurikulum yang Responsif bagi Kompetensi Pendidik. Indo-MathEdu Intellectuals Journal, 5(3), 2901–2911.
Hermawanto, F., & Habibi, H. J. (2025). Rancang Bangun Mesin CNC PCB Berbasis Arduino Untuk Mendukung TEFA Jurusan Teknik Informatika. Jurnal Pengelolaan Laboratorium Pendidikan, 7(2), 73–80.
Hidayat, N., & Khotimah, H. (2019). Pemanfaatan Teknologi Digital DAlam Kegiatan Pembelajaran. Jurnal Pendidikan Dan Pengajaran Guru Sekolah Dasar (JPPGuseda), 2(1), 10–15. https://doi.org/10.33751/jppguseda.v2i1.988
Junadhi, J., Agustin, A., Ali, E., Susanti, S., & Herwin, H. (2023). Optimalisasi Penggunaan Microsoft Powerpoint Guna Mendukung Keahlian Siswa Magang Di Stmik Amik Riau. J-PEMAS - Jurnal Pengabdian Masyarakat, 4(2), 18–24. https://doi.org/10.33372/j-pemas.v4i2.938
Kridoyono, A., Sidqon, M., Yunanda, A. B., Yuwono, I., & Sudaryanto, A. (2024). Pengenalan Teknik Robotika untuk Anak Sekolah Dasar SDN Margorejo 1 Surabaya. Kontribusi: Jurnal Penelitian Dan Pengabdian Kepada Masyarakat, 4(2), 339–355.
Lee, H. S., Jung, S., Jeong, J.-Y., Ryu, S.-H., & Chu, W.-S. (2021). A study on the automated guided vehicle platform for a logistics robot.
Liu, X., Li, S., & Cao, Y. (2018). The Course Orientation of Electronic Technology in the Secondary Vocational Education System BT - Proceedings of the 2018 International Conference on Education, Economics and Social Science (ICEESS 2018). 46–48. https://doi.org/10.2991/iceess-18.2018.11
Nerisafitra, P., & Wibawa, R. P. (2022). Optimalisasi Penggunaan Teknologi Informasi Dalam Penyusunan Media Pembelajaran Interaktif. Prosiding Seminar Nasional Pengabdian Kepada Masyarakat, 1(1), 605–612. https://doi.org/10.33086/snpm.v1i1.852
Pratama, W., & Sudarsono, B. (2024). Model Pembelajaran Berbasis Kerja: Meningkatkan Kompetensi Dan Kesiapan Kerja Siswa SMK.
Qirom, Q., Prabandari, S., & Darmawan, A. (2024). Peningkatan Kualitas Produk Pengolahan Ikan Laut Dengan Pulsed Electric Field Kelurahan Muarareja Kota Tegal. 7(1).
Setyowati, A. (2018). Development of Electronic Learning Design 3 Vocational Education Program in Electronics Engineering Jakarta State University. KnE Social Sciences. https://doi.org/10.18502/kss.v3i12.4132
Sukardjo, M., Khasanah, U., & Rahman, F. (2021). Development of Basic Electronic Practices Module in Vocational Schools. Journal of Hunan University (Natural Sciences), 48(1), 64–71.
Sukardjo, M., Uswatun Khasanah, & Fatur Rahman. (2022). Trainer Effectiveness in Basic Electrical and Electronic Practices in Vocational High Schools. JTP - Jurnal Teknologi Pendidikan, 24(3), 412–425. https://doi.org/10.21009/jtp.v24i3.33595
Wahyuni, N., Putera, R. E., Rahayu, W. K., & Fajri, H. (2022). Peningkatan Pendidikan Ramah Anak Berbasis Literasi Digital. Kumawula: Jurnal Pengabdian Kepada Masyarakat, 5(2), 301. https://doi.org/10.24198/kumawula.v5i2.37090
Waluyo, B. D., Bintang, S., & Januariyansah, S. (2021). The effect of using proteus software as a virtual laboratory on student learning outcomes. Paedagoria: Jurnal Kajian, Penelitian Dan Pengembangan Kependidikan, 12(1), 140–145.
Zakai, F. M., Faizan, M., & Khan, M. F. (2021). PCB Design and Fabrication. In Functional Reverse Engineering of Strategic and Non-Strategic Machine Tools (pp. 79–95). CRC Press.
Article Metrics
Abstract view : 29 timesPDF - 5 times
DOI: https://doi.org/10.26714/jsm.8.1.2025.32-42
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Jurnal Surya Masyarakat
Jurnal Surya Masyarakat (JSM) is licensed under Creative Commons Attribution-NonCommercial-NoDerivatives 4.0
------------------------------------------------------------------------------------------------------------------------
Jurnal Surya Masyarakat (JSM)
p-ISSN: 2623-0364; e-ISSN: 2623-0569
Published by: Lembaga Penelitian dan Pengabdian Masyarakat (LPPM) Universitas Muhammadiyah Semarang
.jpg){kind=logo}