GEOMETRIC INSPECTION OF PRIMARY AIR FAN ROTOR BLADES USING A LASER SCANNER MEASURING TOOL

Mohamad Rofif Wafi Fadilah(1*)


(1) Politeknik Negeri Malang
(*) Corresponding Author

Abstract


New technology related to geometry inspection instruments that have the characteristics of good accuracy, speed, and flexibility are done on Coordinate Measuring Machine. The use of a laser scanner as a measuring instrument has the advantage of the speed of acquisition so that it is suitable for inspecting components that have a complex surface. In this study, the profile measurement method in the Primary Air Fan rotor blade component which was classified as one of the turbo engines was examined. The focus of this research is the description of the tolerance inspection process line profile in general turbo engine blades, specifically the Primary Air Fan blade of the 660 MW Steam Power Plant with refer to the ISO TR 5460 using a 3D laser scanner measuring instrument. ISO TR 5460 is a technical report standard that contains guidelines for verifying geometry tolerance that are described at ISO 1101. The process of inspection of line profile geometry on turbo engine blades with 3D laser scanner measuring instruments generally works by comparing the reference data with measured data. Reference data is a CAD model while measured data is point clouds that have been carried out triangulation / meshing process obtained from the measurement results of measuring objects. The results of the inspection of the line profile tolerance on the Primary Air Fan blade indicate that in each section it was declared not passed the inspection.

 

Keywords: Geometrical inspection, line profile tolerance, laser scanner, turbo engine blade, Primary Air Fan.


Keywords


Geometrical inspection; Line profile tolerance; Laser scanner; Turbo engine blade; Primary Air Fan

References


M. R. (2022). Experimental technique to analyze the influence of cutting. Adv.Manuf. (2022) 10:260–271, 261-264.

G.Y. Zhao, Z. L. (2017). Energy Consumption in Machining: Classification,Prediction, and Reduction . 10.1016/j.energy.2017.05.110, 4-8.

Hacksteiner, M. (2018). Energy efficiency of state-of-the-art grinding processes.

Procedia Manufacturing 21 (2018) 717–724, 722-723.

Muhammad Rizwan Awan 1, 2. H. (2022). Machine Learning-Based Prediction of Specific Energy. Energy Consumption for Cut- Off, grinding sensors 2022, 4-7.

Sandwiyatno, H. (2018). Pengaruh Variasi Kedalaman Potong dan Pembebanan Terhadap Nilai MRR. TUGAS AKHIR – VM 180629, 21-26.

Unver2, M. M. (2016). Energy efficiency of machining. Proc IMechE 2016, 5-6. Viktoria Mannheim 1, *. a. (2022). Energy-Model and Life Cycle-

Model for Grinding Processes of limestone

product. Energies 2022, 15, 3816, 5-8

Pradipto, B. (2018). PENGARUH KECEPATAN PUTAR MESIN GRINDING DAN POLISH TERHADAP BENDA UJI. 106-109.

Jeevanantham, S. (2017). Effect of Machining Parameters on MRR and Surface Roughness in internal grinding using EN8,EN31 Steel. 2966-2967.

Herman, M. F. (2021). Evaluasi Kinerja Efisiensi Energi Mesin Bubut Melalui Penilaian Indikasi Specific Energy Consumption

. 398-340.


Article Metrics

Abstract view : 53 times


DOI: https://doi.org/10.26714/traksi.23.2.2023.286-310

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 TRAKSI

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


TRAKSI : Majalah Ilmiah Teknik Mesin

ISSN : 1693-3451 (Pinted) e-ISSN : 2579-9738 (Online)

Published by: LP2M Unimus bekerjasama dengan APTI (Asosiasi Profesi Teknik Indonesia)  

 
ADDRESS

Jl. Kasipah No. 12 Semarang

E-mail: traksi@unimus.ac.id Call: 0248445768


Sponsors

Asosiasi Profesi Teknik Indonesia (APTI)

Website: www.apti.or.id