PLC-BASED WAX COATING SYSTEM PLANNING FOR FOOD PACKAGING CARTONS
(1) Institut Sains dan Teknologi Akprind
(2) Institut Sains dan Teknologi Akprind
(3) Institut Sains dan Teknologi Akprind
(4) Institut Sains dan Teknologi Akprind
(5) Institut Sains dan Teknologi Akprind
(*) Corresponding Author
Abstract
Packaging is the spearhead of marketing because it directly deals with consumers. Technological advances in the world of modern manufacturing and trading industries are competing to innovate to create the highest quality packaging. Paraffin wax coating, which is waterproof can provide resistance to packaging and the strength of a product so that protection is guaranteed against light, gas, harmful bacteria. The wax coating process without the use of large amounts of human labor requires a laminating system with a PLC program. Planning of this control system is supported by the selection of components based on the voltage on the PLC and ladder diagram simulation assistance with CX-Designer software. The simulation results of ladder diagram control system runs well and the application of ON OFF control using no NC instructions, temperature control thermostat, solenoid valve to open the valve in the chamber, and the calculation of the number of cartons that have been laminated with counter instructions and as an OFF signal on the motor.
Keywords
Full Text:
PDFReferences
Airlangga, F.G, Triwiyatno A, Sumardi. 2017. “Perancangan Sistem Automasi Pada Pengemasan Susu Dalam Botol Dengan Programmable Logic Controller (PLC) Omron CP1E Terhadap Purwarupa Fillinh Bttle And Capping Machine” TRANSIENT, VOL.6, NO. 1.104.
Budiyanto, M dan Wijaya, A. 2003. “Pengenalan dasar-dasar PLC (Programmable Logic Controller)”. Gava media Yogyakarta.
Bolton, W. 2004. “Programmable Logic Controller (PLC)”. Edisi Ketiga, Erlangga, Jakarta.
Kadirun, Hasanuddin dan Aryanto. 2016. “Penerapan Sistem Stop Sign Pada Pertigaan Jalan Berbasis Sensor Photoelectric Studi Kasus Pada Pt.Chevron Pacific Indonesia”, FASILKOM, Vol. 5, No. 2, hlm 1-2.
Prasetyo, R.E. 2019. “Mesin Pemecah Telur Dan Pemisah Isi Telur Berbasis PLC OMRON CPM2A” Tugas Akhir Teknik Elektro, Universitas Sanata Dharma, Yogyakarta.
Halifah. 2018. “Rancang Bangun Alat Sealer Otomatis Untuk Press Kemasan Plastik Industri Makanan Ringan Berbasis Programmable Logic Controller (PLC)” Tugas Akhir Pendidikan Vokasional Teknik Elektro, Universitas Negeri Jakarta.
Hilton, D. J. 1993. Impact and Vibration Damage to Fruit during Handling and Transportation. In: Champ, B. R., E. Highley and G. I. Jhonson, editor. Postharvest Handling of Tropical Fruits. Proceedings of An International Conference, Chiang Mai, Thailand, 19 – 23 July 1993
Prastiya, B. 2015. “Prototype Sistem Pengisian Dus Otomatis Dengan Robotik Berbasis Plc (Programmable Logic Controller). Tugas Akhir Teknik Elektro, Universitas Negeri Semarang.
Saputra A, Wahyu A, Rahman F. 2017. “Sistem Koreksi Otomatis Pada Mesin Packaging dengan Pengendali PLC”. Jurnal Teknologi Elektro, Universitas Mercu Buana, Vol.8 No.1.
Zarkasi, M dkk. 2018. “Performa selenoid pada valve alat pengisisan air minum otomatis”. Jurnal ELEKTRA, Vol.3, hlm 53-60
Hariyani N, Wibawanto S, Putranto H. 2021. ”Modul Cx-progranner dan Cx-designer” Modul The Learning Universiy, Universitas Negeri Malang.
Article Metrics
Abstract view : 80 timesPDF - 35 times
DOI: https://doi.org/10.26714/traksi.23.2.2023.162-171
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 TRAKSI
This work is licensed under a Creative Commons Attribution 4.0 International License.
TRAKSI : Majalah Ilmiah Teknik Mesin
ISSN : 1693-3451 (Pinted) e-ISSN : 2579-9738 (Online)
Published by: LP2M Unimus bekerjasama dengan APTI (Asosiasi Profesi Teknik Indonesia)
Jl. Kasipah No. 12 Semarang
E-mail: traksi@unimus.ac.id Call: 0248445768
Sponsors
Asosiasi Profesi Teknik Indonesia (APTI)
Website: www.apti.or.id